BTU Calculator
Size an air conditioner or heater for a room, or estimate a whole home's heating load by climate zone.
How to use the BTU Calculator
- Pick what you want to work out using the tabs: Room (AC / heat) or Whole-home heating.
- Enter Room length and choose its unit.
- Enter Room width and choose its unit.
- Enter Ceiling height and choose its unit.
- Choose Insulation.
- Choose Sun exposure.
- Fill in the remaining fields, or keep their sensible defaults.
- Read your answer in the results panel. It updates as you type, and the breakdown, step-by-step working and any charts or tables appear below it.
- Use Share link to save or send the exact calculation, or Copy to paste the results elsewhere.
What BTU/h measures
A British Thermal Unit (BTU) is the heat needed to warm one pound of water by 1 °F. Heating and cooling equipment is rated in BTU per hour (BTU/h), meaning how much heat it can add or remove each hour. Two other units are common: one ton of cooling is 12,000 BTU/h, and one kilowatt is 3,412 BTU/h.
Room mode: the rule of thumb
The usual starting point for cooling a room is about 20 BTU/h per square foot (roughly 215 BTU/h per m²), assuming an 8 ft ceiling. The calculator then adjusts that figure:
- Ceiling height: scaled in proportion, so a 10 ft ceiling adds 25%.
- Insulation: ×0.9 for a well-insulated room, ×1.2 for a poor or drafty one.
- Sun: −10% for a heavily shaded room, +10% for a very sunny one.
- People: +600 BTU/h for each regular occupant beyond two.
- Kitchen: +4,000 BTU/h for cooking appliances.
BTU/h = 20 × ft² × (h ÷ 8) × insulation × sun + 600 × (people − 2) + kitchen
Worked example
A 20 × 25 ft living room is 500 ft². With an 8 ft ceiling, average insulation and normal sun, it needs 500 × 20 = 10,000 BTU/h, which is 0.83 tons or 2.93 kW. A 10,000 BTU unit fits. If the same room were very sunny, used by four people and open to a kitchen, the figure becomes 11,000 + 1,200 + 4,000 = 16,200 BTU/h, and an 18,000 BTU unit is the next standard size.
Whole-home heating by climate zone
For heating, the load depends mostly on how cold winters get. A common rule of thumb is about 30–35 BTU/h per square foot in the hottest US zone and 50–60 in the coldest, adjusted for ceiling height and insulation. Furnaces are rated by input, and only the AFUE percentage of that input reaches the house. So the input rating has to be the load divided by the efficiency. A 1,500 ft² home in zone 4 needs roughly 67,500–75,000 BTU/h of heat, which a 95% AFUE furnace delivers with about 79,000 BTU/h of input.
Why not just buy bigger?
An oversized air conditioner cools the room quickly and then shuts off before it has removed much humidity, which leaves the room cold and clammy. It also cycles on and off more, which wears it out faster. An undersized unit runs nonstop on hot days. These rules of thumb are good for room units and budgeting. For central systems, ask for a Manual J load calculation, which accounts for windows, orientation, air leakage and duct losses.
Frequently asked questions
How many BTU do I need per square foot?
For cooling, about 20 BTU/h per ft² is a common starting point with 8 ft ceilings. Add more for sunny rooms, kitchens and high ceilings, and less for shaded, well-insulated rooms.
What size air conditioner do I need for a 500 square foot room?
Around 10,000 BTU/h for a typical room with 8 ft ceilings. Choose 12,000 BTU/h if the room is very sunny, has more than two regular occupants or includes a kitchen.
How many BTU are in a ton of air conditioning?
One ton of cooling is 12,000 BTU/h, about 3.52 kW. A 3-ton central air system is therefore rated at 36,000 BTU/h.
How do I convert BTU/h to kW?
Multiply BTU/h by 0.000293, or divide by 3,412. For example, 10,000 BTU/h is about 2.93 kW.