Tile Calculator
Enter the area, tile size, grout joint and waste allowance to get the number of tiles, the boxes to buy and the cost.
How to use the Tile Calculator
- Choose Measure the floor or wall by.
- Enter Tile length and choose its unit.
- Enter Tile width and choose its unit.
- Enter Grout joint width and choose its unit (1/8 in = 0.125 in ≈ 3 mm).
- Enter Waste for cuts and breakage (10% for straight lay, 15–20% for diagonal or herringbone).
- Fill in the remaining fields, or keep their sensible defaults.
- Add any optional details you have; leave the rest blank.
- Read your answer in the results panel. It updates as you type, and the breakdown, step-by-step working and any charts or tables appear below it.
- Use Share link to save or send the exact calculation, or Copy to paste the results elsewhere.
How many tiles do I need?
Each tile covers its own face plus half a grout joint on every side. In practice that means you can treat each tile as covering (tile length + joint) × (tile width + joint). Divide the area you’re tiling by that figure, then add a waste allowance for cuts, breakage and spares.
tiles = area ÷ ((L + g) × (W + g)) × (1 + waste %) → round up
You can measure the room as length × width, or switch to Total area if you have already added up an irregular space. Tile sizes are usually listed in inches in the US and in millimeters or centimeters elsewhere. Every field takes its own unit, so a 30 × 60 cm tile in a room measured in feet works fine.
Worked example
A 10 ft × 12 ft bathroom floor is 120 ft², or 17,280 in². Using 12 × 12 in tiles with a 1/8 in (0.125 in) joint, each tile covers 12.125 × 12.125 = 147.02 in². So 17,280 ÷ 147.02 = 117.5 tiles. Adding 10% waste gives 129.3, which rounds up to 130 tiles. If a box holds 10 tiles you need 13 boxes. At $2.50 per tile that comes to $325.
How much waste to allow
| Layout | Typical waste |
|---|---|
| Straight grid, simple room | 10% |
| Offset or brick pattern | 10–15% |
| Diagonal (45°) | 15% |
| Herringbone or many cut-outs | 15–20% |
| Large-format tiles (24 in and up) | 15% or more |
Large tiles waste more because every offcut is big and a single crack ruins a whole piece. Rooms with many corners, pipes or a toilet flange also push the figure up.
Practical tips
- Buy every box from the same production lot (shade or dye lot). A later batch can differ noticeably in color.
- Keep a few spare tiles after the job. Replacing a cracked tile years later is much easier with matching stock.
- Grout joints usually range from 1/16 in (1.5 mm) for rectified tiles to 1/4 in (6 mm) or more for rustic tiles. Wider joints mean slightly fewer tiles.
- For walls, subtract large openings such as windows and doors, but leave small cut-outs in the total. They still use whole tiles.
Frequently asked questions
How many tiles do I need for 100 square feet?
With 12 × 12 in tiles and no grout joint, 100 ft² takes 100 tiles. With a 1/8 in joint it is about 98, and with 10% waste you should buy about 108.
How much extra tile should I buy?
Buy 10% extra for a straight layout, 15% for a diagonal layout or large-format tiles, and up to 20% for herringbone or complicated rooms.
Does grout width change how many tiles I need?
Yes, slightly. Each tile effectively covers its size plus one joint width in each direction. With small tiles and wide joints the difference can be 5% or more.
How many tiles are in a box?
It depends on the tile size. Boxes are usually packed to cover about 8–16 ft² (roughly 1–1.5 m²). The coverage and piece count are printed on the box.