Roofing Calculator
Enter the house footprint, overhang and roof pitch to get the roof area, roofing squares, bundles of shingles and underlayment rolls.
How to use the Roofing Calculator
- Enter House length and choose its unit.
- Enter House width and choose its unit.
- Enter Eave and rake overhang and choose its unit.
- Enter Roof pitch (Rise in inches per 12 in of run (6 = 6/12), or degrees).
- Choose Pitch entered as.
- Fill in the remaining fields, or keep their sensible defaults.
- Add any optional details you have; leave the rest blank.
- Read your answer in the results panel. It updates as you type, and the breakdown, step-by-step working and any charts or tables appear below it.
- Use Share link to save or send the exact calculation, or Copy to paste the results elsewhere.
How the roof area is calculated
You can’t easily measure a roof from the ground, but you can measure the house. The roof covers the footprint plus the overhang on every side, and a sloped roof has more surface than the flat area beneath it. The pitch multiplier turns that horizontal area into the real sloped area.
roof area = (length + 2 × overhang) × (width + 2 × overhang) × √(1 + (pitch ÷ 12)²)
Pitch is the rise in inches for every 12 in of horizontal run, so a 6/12 roof climbs 6 in per foot. The multiplier is simply the hypotenuse of that 12-by-pitch triangle divided by 12. The same multiplier works for gable and hip roofs, as long as every plane has the same pitch. Dormers, valleys with different pitches and flat sections need to be measured separately.
Squares, bundles and underlayment
Roofers price work in squares. One square is 100 ft² (about 9.29 m²). Standard architectural and 3-tab asphalt shingles come three bundles to the square. Underlayment is sold by the roll: #15 felt covers about 4 squares, #30 felt about 2, and a synthetic roll often 10. The exact coverage is printed on the label.
Worked example
A house is 40 ft × 30 ft with a 12 in overhang and a 6/12 roof. With the overhang, the footprint is 42 × 32 = 1,344 ft². The multiplier for 6/12 is √(1 + 0.25) = 1.118, so the roof area is 1,344 × 1.118 = 1,502.6 ft². Adding 10% for waste gives 1,652.9 ft², or 16.53 squares. Multiply by 3 and you get 49.6, which rounds up to 50 bundles. At $38 per bundle, the shingles alone cost $1,900.
Choosing a waste factor
- Simple gable roof: about 10%.
- Hip roof or several valleys: 15%, since every hip and valley needs cut pieces.
- Complex roofs with dormers and turrets: up to 20%.
Ridge caps, starter strip, drip edge, ice-and-water shield and flashing are bought separately and aren’t included in the bundle count. If you’re tearing off an old roof, also plan for disposal: one layer of asphalt shingles weighs roughly 200–250 lb per square.
Pitch and angle
The table under the results converts common pitches to degrees and multipliers. A 4/12 pitch is 18.4°, 6/12 is 26.6°, 12/12 is 45° and needs 41% more material than a flat footprint. Roofs below about 2/12 generally need roll roofing or a membrane rather than shingles.
Frequently asked questions
How many bundles of shingles do I need for a square?
Most asphalt shingles come three bundles per square, and one square covers 100 ft². Some heavy designer shingles need four or five bundles per square, so check the wrapper.
How do I calculate roof pitch?
Measure how many inches the roof rises over 12 in of horizontal run. A rise of 6 in over 12 in is a 6/12 pitch. In degrees that is arctan(6 ÷ 12) = 26.6°.
What is a roof pitch multiplier?
It is the ratio of the sloped roof area to the flat footprint: √(1 + (pitch ÷ 12)²). For 6/12 it is 1.118, for 8/12 it is 1.202, and for 12/12 it is 1.414.
How much waste should I add for roofing?
Plan on around 10% for a simple gable roof and 15% for hip roofs or roofs with valleys. Very cut-up roofs can need 20%.