Skip to content

Tire Size Calculator

Type two tire sizes, or enter width, aspect ratio and wheel size separately.

EverydayUpdated Free · No sign-up

How to use the Tire Size Calculator

  1. Choose Enter sizes as.
  2. Enter Speedometer reading.
  3. Choose Speed unit.
  4. Read your answer in the results panel. It updates as you type, and the breakdown, step-by-step working and any charts or tables appear below it.
  5. Use Share link to save or send the exact calculation, or Copy to paste the results elsewhere.

Reading a tire size

A metric tire size such as 225/45R17 94W packs in three dimensions. The first number, 225, is the section width in millimeters. The second, 45, is the aspect ratio: the sidewall height as a percentage of the width. The R means radial construction, and 17 is the wheel (rim) diameter in inches. The trailing load index and speed rating (94W) don’t affect size. A P or LT prefix marks passenger or light-truck tires, and the calculator accepts it.

The formulas

sidewall = width × aspect ÷ 100 · diameter = 2 × sidewall + rim × 25.4

circumference = π × diameter · revs per mile = 1,609,344 mm ÷ circumference

Your speedometer counts wheel revolutions and assumes the original tire’s circumference. Fit a taller tire and each revolution covers more ground, so you travel faster than the speedometer shows.

actual speed = indicated speed × new diameter ÷ old diameter

Worked example

Compare 225/45R17 with 235/40R18. The first tire’s sidewall is 225 × 0.45 = 101.25 mm, so its diameter is 2 × 101.25 + 17 × 25.4 = 634.3 mm (24.97 in). That gives a circumference of 1,992.7 mm, or 807.6 revolutions per mile. The second tire’s sidewall is 94 mm, so its diameter is 645.2 mm (25.40 in), 1.72% larger. When the speedometer reads 60 mph you are really doing 61.03 mph, and the odometer under-records distance by the same 1.7%.

How much difference is safe?

The common guideline for replacement or plus-sized tires is to keep the overall diameter within about ±3% of the original. Beyond that, the speedometer and odometer are noticeably off. ABS, traction control and automatic gear shifts can also behave differently, and the tire may rub on the suspension or bodywork at full lock or under compression. When you go up in wheel size (plus sizing), lower the aspect ratio to keep the diameter about the same. That is exactly what 225/45R17 to 235/40R18 does.

Other things to check

  • Load index and speed rating must equal or exceed the original tire’s.
  • Rim width must suit the new tire’s section width. Each tire size has an approved rim-width range.
  • Clearance: wider tires can touch struts or fender liners even when the diameter matches.
  • Ride and economy: lower-profile sidewalls ride firmer, and wider tires usually add a little rolling resistance and road noise.

Frequently asked questions

What do the numbers on a tire mean?

In 225/45R17, 225 is the width in millimeters, 45 is the sidewall height as a percentage of the width, R means radial, and 17 is the wheel diameter in inches.

How much bigger can my tires be without affecting the speedometer?

Any change in diameter shifts the speedometer by the same percentage. Staying within about ±3% of the original diameter is the usual guideline for keeping the error small and the safety systems working normally.

Do bigger tires make my speedometer read faster or slower?

Larger-diameter tires make the speedometer read slower than your true speed, because each revolution covers more distance. Smaller tires make it read faster.

How do I calculate tire diameter?

Multiply the width by the aspect ratio ÷ 100 to get the sidewall height in mm. Double it, then add the rim diameter times 25.4. For 225/45R17 that is 634.3 mm, or 24.97 in.