Gravel Calculator
Enter the area, depth and material to get the volume and weight of gravel, stone, sand or topsoil, and the cost by the ton or the yard.
How to use the Gravel Calculator
- Choose Shape.
- Enter Depth and choose its unit.
- Choose Material.
- Enter Extra for compaction and waste.
- Choose Price is per.
- Add any optional details you have; leave the rest blank.
- Read your answer in the results panel. It updates as you type, and the breakdown, step-by-step working and any charts or tables appear below it.
- Use Share link to save or send the exact calculation, or Copy to paste the results elsewhere.
Volume first, then weight
Quarries and landscape yards sell aggregate either by volume (cubic yards or cubic meters) or by weight (tons or tonnes). So the calculator first finds the volume, area × depth, adds an allowance for compaction, and then multiplies by the density of the material you pick.
weight = area × depth × (1 + extra %) × density
Typical densities
| Material | lb per yd³ | US tons per yd³ | kg per m³ |
|---|---|---|---|
| Gravel (mixed) | 2,800 | 1.40 | 1,660 |
| Crushed stone | 2,700 | 1.35 | 1,600 |
| Pea gravel | 2,600 | 1.30 | 1,540 |
| Sand (dry) | 2,700 | 1.35 | 1,600 |
| Topsoil | 2,200 | 1.10 | 1,305 |
These are typical figures for loose, dry material. Wet sand and soil can weigh 10–20% more. If your supplier quotes a density, choose Custom density and enter it in lb/ft³ or kg/m³.
Worked example
A 10 ft × 10 ft pad, 4 in deep, holds 100 × 0.333 = 33.3 ft³. That is 33.3 ÷ 27 = 1.23 yd³ (0.94 m³). At 2,800 lb per cubic yard it weighs 3,457 lb, which is 1.73 US tons or 1.57 tonnes. At $50 per ton the stone costs about $86, before delivery. With the default 10% allowance for compaction and waste you would order about 1.9 tons.
How deep should gravel be?
- Walkways and patios: 2–3 in of pea gravel or decomposed granite over landscape fabric.
- Driveways: 4–6 in of compacted crushed base, then 2–3 in of surface gravel. New driveways on soft ground may need 8–12 in in total.
- Drainage trenches and French drains: fill the trench, usually with 3/4 in clean stone.
- Base under pavers or a shed: 4–6 in of compacted crushed stone.
Tips
- Crushed, angular stone compacts and locks together. Round pea gravel doesn’t, so it moves underfoot and on slopes.
- Compaction can shrink a base layer’s volume by 10–20%. Use a higher extra percentage for compacted base courses.
- A standard pickup truck bed holds about 1–2 yd³ by volume, but its payload limit often allows only around half a ton to a ton of stone. Check your truck’s rating before you load up.
Frequently asked questions
How much does a cubic yard of gravel weigh?
Typically about 2,800 lb, or 1.4 US tons (about 1.27 tonnes). Crushed stone and sand are slightly lighter when dry, around 2,700 lb, and wet material is heavier.
How many tons of gravel do I need for a driveway?
Multiply length × width × depth to get the volume, divide by 27 for cubic yards, then multiply by about 1.4. A 12 × 50 ft driveway at 4 in deep is 7.4 yd³, or about 10.4 tons.
How many square feet does a ton of gravel cover?
At 2 in deep, one ton of gravel (about 0.71 yd³) covers roughly 116 ft². At 4 in it covers about 58 ft².
What is the difference between tons and tonnes?
A US (short) ton is 2,000 lb (907 kg). A metric tonne is 1,000 kg (2,205 lb). Suppliers in the US quote short tons, and most other countries use tonnes.