Home & Construction Calculators
Concrete, flooring, roofing, stairs, gravel and project material estimates.
All 8 home & construction calculators
Most used first
- Concrete Calculator PopularPick a shape, enter its dimensions in feet, inches or metric, and get the volume in cubic yards, cubic feet and cubic meters plus the number of premixed bags.
- Gravel Calculator PopularEnter the area, depth and material to get the volume and weight of gravel, stone, sand or topsoil, and the cost by the ton or the yard.
- Stair Calculator PopularEnter the floor-to-floor height and your target riser and tread sizes.
- BTU Calculator PopularSize an air conditioner or heater for a room, or estimate a whole home's heating load by climate zone.
- Tile CalculatorEnter the area, tile size, grout joint and waste allowance to get the number of tiles, the boxes to buy and the cost.
- Roofing CalculatorEnter the house footprint, overhang and roof pitch to get the roof area, roofing squares, bundles of shingles and underlayment rolls.
- Square Footage CalculatorChoose a shape or add up several rooms.
- Mulch CalculatorEnter the bed's shape, size and depth to get the mulch volume in cubic yards and the number of bags to buy.
Try the Concrete Calculator right here
Open the full calculatorNo calculators match. Try a shorter word, or search the whole site.
Plan materials before you buy
- Concrete: the Concrete Calculator works out cubic yards and the number of 40, 60 or 80 lb bags for slabs, footings, columns, curbs and steps.
- Floors and walls: the Square Footage and Tile calculators measure rooms of any shape and add a waste allowance.
- Outdoors: the Mulch and Gravel calculators turn an area and depth into cubic yards, bags or tons.
- Roofs and stairs: the Roofing Calculator converts pitch to roof area and shingle bundles, and the Stair Calculator checks riser and tread sizes against common US building code limits.
- Comfort: the BTU Calculator sizes an air conditioner or heater for a room.
Measure once, order once
Measure in the same unit throughout, or let each calculator convert for you. Add a waste allowance: about 10 percent for concrete and tile, more for diagonal tile layouts or complex rooms. Ordering slightly too much is usually cheaper than a second delivery, especially for ready-mix concrete, which suppliers often charge a short-load fee for.
Results are material estimates. Building codes vary by city and county, so check local requirements, and use a licensed professional for structural, electrical and gas work.
Frequently asked questions
How many 80 lb bags of concrete make a cubic yard?
About 45. One 80 lb bag yields roughly 0.6 cubic feet, and a cubic yard is 27 cubic feet.
How much extra material should I order?
Around 5 to 10 percent for most jobs and 15 percent or more for diagonal tile or rooms with many corners.
Do the stair results meet building code?
The Stair Calculator checks against widely used IRC limits (7.75-inch maximum riser, 10-inch minimum tread). Local codes can differ, so confirm with your building department.