Skip to content

Resistor Calculator

Read a resistor's value from its color bands, find the color code for a value you need, or work out the total resistance of resistors in series and parallel.

Science & EngineeringUpdated Free · No sign-up

How to use the Resistor Calculator

  1. Pick what you want to work out using the tabs: Color code → value, Value → color code or Series & parallel.
  2. Choose Number of bands.
  3. Choose 1st band (digit).
  4. Choose 2nd band (digit).
  5. Choose Multiplier band.
  6. Choose Tolerance band.
  7. Read your answer in the results panel. It updates as you type, and the breakdown, step-by-step working and any charts or tables appear below it.
  8. Use Share link to save or send the exact calculation, or Copy to paste the results elsewhere.

Reading the color code

Through-hole resistors are too small to print numbers on, so their value is shown with colored bands. Hold the resistor so that the tolerance band (often gold or silver, and usually a little apart from the others) is on the right, then read from left to right.

Color Digit Multiplier Tolerance
Black 0 ×1 —
Brown 1 ×10 ±1%
Red 2 ×100 ±2%
Orange 3 ×1k ±0.05%
Yellow 4 ×10k ±0.02%
Green 5 ×100k ±0.5%
Blue 6 ×1M ±0.25%
Violet 7 ×10M ±0.1%
Grey 8 ×100M ±0.01%
White 9 ×1G —
Gold — ×0.1 ±5%
Silver — ×0.01 ±10%
  • 4 bands: two digits, multiplier, tolerance.
  • 5 bands: three digits, multiplier, tolerance. Used on precision (1% and better) parts.
  • 6 bands: as 5 bands, plus a temperature coefficient in ppm/K.

Worked example

Yellow, violet, red, gold: the digits are 4 and 7, the multiplier is ×100, so the value is 47 × 100 = 4,700 Ω, or 4.7 kΩ. Gold means ±5%, so the real resistance can be anywhere from 4,465 Ω to 4,935 Ω.

Series and parallel

Resistors in series simply add up. In parallel, the reciprocals add:

Rseries = R1 + R2 + … + Rn

1 ÷ Rparallel = 1 ÷ R1 + 1 ÷ R2 + … + 1 ÷ Rn

For 100 Ω, 220 Ω and 470 Ω, the series total is 790 Ω. In parallel, 1/100 + 1/220 + 1/470 = 0.016673, so the total is about 59.98 Ω. A parallel total is always smaller than the smallest resistor in the group.

Tips

  • If you can’t tell which end is which, a reading that gives a standard value (such as 4.7k, 10k or 22k) is almost always the right way round.
  • Brown and red can look alike under warm light, and so can violet and grey. Check doubtful parts with a multimeter.
  • A single black band means a zero-ohm link used as a jumper.
  • The temperature coefficient tells you how much the value drifts. 100 ppm/K on a 10 kΩ resistor is 1 Ω per °C.

Frequently asked questions

How do I read a 4-band resistor?

The first two bands are digits, the third is the multiplier (the number of zeros) and the fourth is the tolerance. Red-red-brown-gold is 22 × 10 = 220 Ω ±5%.

Which end of a resistor do I start reading from?

Start from the end opposite the tolerance band. The tolerance band is usually gold or silver and often has a wider gap before it.

What is the color code for 10k ohm?

Brown, black, orange for a 4-band resistor (10 × 1,000), followed by the tolerance color. On a 5-band resistor it is brown, black, black, red.

How do I calculate two resistors in parallel?

Multiply them and divide by their sum: R = R1 × R2 ÷ (R1 + R2). Two 1 kΩ resistors in parallel make 500 Ω.