Electricity Cost Calculator
List your appliances with their power in watts and how many hours a day they run.
How to use the Electricity Cost Calculator
- Enter Electricity price.
- Enter Days used per month.
- Choose Number of appliances.
- Read your answer in the results panel. It updates as you type, and the breakdown, step-by-step working and any charts or tables appear below it.
- Use Share link to save or send the exact calculation, or Copy to paste the results elsewhere.
How electricity is billed
Utilities charge for energy, not power. Power, in watts, is how fast a device uses energy. Energy is power multiplied by time and is billed in kilowatt-hours (kWh). One kWh is 1,000 watts running for one hour, or 100 watts for ten hours.
kWh per day = watts × hours per day ÷ 1,000
cost = kWh × price per kWh
Worked example
With electricity at $0.16 per kWh and 30 days of use per month:
| Appliance | Power | Hours/day | kWh/month | Cost/month |
|---|---|---|---|---|
| Refrigerator | 150 W | 24 | 108 | $17.28 |
| Television | 100 W | 5 | 15 | $2.40 |
| Laptop | 60 W | 8 | 14.4 | $2.30 |
| Total | 137.4 | $21.98 |
Over a year that is 1,648.8 kWh and about $264. The donut chart under the results shows which appliance takes the biggest share of your bill.
Finding the wattage
Look for a label on the back or bottom of the device, or in the manual. If it only lists volts and amps, multiply them: 120 V × 2 A = 240 W. That gives the maximum draw, and many devices use less in normal use. A plug-in energy meter gives the most accurate figure.
Appliances that cycle
Refrigerators, freezers, air conditioners and electric water heaters switch on and off as needed, so the label wattage overstates their use if you enter 24 hours. A fridge rated at 150 W might only run its compressor 8–12 hours a day. For these, either enter the average running hours or use the annual kWh figure from the energy label, divided by 365, to back out a realistic daily use.
Ways to cut the cost
- Swap incandescent bulbs for LEDs, which use about 80% less power for the same light.
- Unplug or switch off devices on standby. A few watts each, running 24 hours, add up over a year.
- Check for time-of-use pricing. Running the dishwasher or charging an EV at off-peak rates can halve the cost.
- When replacing appliances, compare the annual kWh on the energy label, not just the purchase price.
Results are estimates. Your bill may also include fixed daily charges, taxes and tiered rates that this calculator doesn’t model.
Frequently asked questions
How do I calculate the cost of running an appliance?
Multiply its wattage by the hours used, divide by 1,000 to get kWh, then multiply by your price per kWh. A 1,000 W heater for 3 hours at $0.15/kWh costs 3 × 0.15 = $0.45.
How many kWh does a refrigerator use per month?
A modern fridge typically uses 30–60 kWh a month. Older models can use over 100 kWh. Check the energy label for the annual figure and divide by 12.
What is the average electricity price per kWh?
In the US it is roughly 15–18 cents per kWh for homes, but it varies a lot by state and season. Use the rate from your own bill for accurate results.
Does a device use power when it is switched off?
Many do. Chargers, TVs, game consoles and smart speakers often draw 0.5–5 W on standby, which can add a few dollars a year each.