Skip to content

Half-Life Calculator

Solve exponential decay problems for any unknown, see the decay curve, and convert between half-life, mean lifetime and decay constant.

MathUpdated Free · No sign-up

How to use the Half-Life Calculator

  1. Pick what you want to work out using the tabs: Half-life decay or Half-life ⇄ τ ⇄ λ.
  2. Choose Solve for.
  3. Read your answer in the results panel. It updates as you type, and the breakdown, step-by-step working and any charts or tables appear below it.
  4. Use Share link to save or send the exact calculation, or Copy to paste the results elsewhere.

The half-life formula

A quantity with a constant half-life loses half of what remains in each half-life period. After one half-life 50% is left, after two 25%, after three 12.5%, and so on.

N(t) = N₀ × (1/2)^(t ÷ T½)

Here N₀ is the starting amount, N(t) the amount left after time t, and T½ the half-life. Time and half-life must be in the same unit (both in years, both in hours, and so on). Rearranging with logarithms lets you solve for any one unknown:

  • t = T½ × ln(N(t) ÷ N₀) ÷ ln(½)
  • T½ = t × ln(½) ÷ ln(N(t) ÷ N₀)
  • N₀ = N(t) ÷ (½)^(t ÷ T½)

Worked example: carbon-14

Carbon-14 has a half-life of about 5,730 years. How much of a 100 g sample remains after 10,000 years?

  1. Number of half-lives: 10,000 ÷ 5,730 ≈ 1.7452.
  2. Fraction left: 0.5^1.7452 ≈ 0.2983.
  3. Amount left: 100 × 0.2983 ≈ 29.83 g.

Run backwards, the same equation is the basis of radiocarbon dating: measure the fraction of carbon-14 remaining in a sample and solve for t.

Half-life, mean lifetime and decay constant

Exponential decay is often written N(t) = N₀e^(−λt), where λ is the decay constant. The mean lifetime τ is the average time a single particle survives before decaying. The three are linked by ln 2 ≈ 0.693147:

T½ = ln 2 ÷ λ = τ × ln 2

A half-life of 10 days therefore means λ ≈ 0.0693 per day and τ ≈ 14.43 days. The mean lifetime is always longer than the half-life, because a few particles survive for a very long time.

Where half-life applies

  • Radioactive isotopes, from fractions of a second to billions of years.
  • Medicines: many drugs are cleared roughly exponentially, and after about five half-lives very little remains. Dosing decisions belong to a doctor or pharmacist, not a calculator.
  • Other first-order processes, such as some chemical reactions and the cooling of a hot object towards room temperature.

Decay is random at the level of individual atoms. The formula describes the average behaviour of large numbers, so it becomes less exact when only a handful of particles are involved.

Frequently asked questions

How much is left after 3 half-lives?

One eighth, or 12.5%. Each half-life halves the remaining amount: ½ × ½ × ½ = ⅛.

How do I calculate half-life from two measurements?

Use T½ = t × ln(0.5) ÷ ln(N(t) ÷ N₀). For example, if 100 units fall to 25 in 10 hours, the half-life is 5 hours.

What is the difference between half-life and mean lifetime?

Half-life is the time for half the quantity to decay. Mean lifetime is the average survival time of one particle, equal to the half-life divided by ln 2, about 1.4427 times longer.

Does anything ever fully decay?

Mathematically the amount approaches zero but never reaches it. In practice, after about 10 half-lives less than 0.1% remains, and eventually the last atom decays.