Skip to content

Percent Error Calculator

Compare a measured value with the accepted value to see how far off it is, as a percentage of the true value.

MathUpdated Free · No sign-up

How to use the Percent Error Calculator

  1. Enter Observed (measured) value.
  2. Enter True (accepted) value.
  3. Read your answer in the results panel. It updates as you type, and the breakdown, step-by-step working and any charts or tables appear below it.
  4. Use Share link to save or send the exact calculation, or Copy to paste the results elsewhere.

The percent error formula

Percent error expresses how far a measurement lands from the accepted (true, theoretical or reference) value, relative to the size of that true value.

percent error = |observed − true| ÷ |true| × 100%

Dividing by the true value is what makes the result comparable across experiments. Being 2 cm off when measuring a 10 cm object is a 20% error; being 2 cm off over 10 m is only 0.2%.

Worked example

A student measures the acceleration due to gravity as 9.6 m/s². The accepted value is 9.81 m/s².

  1. Difference: 9.6 − 9.81 = −0.21.
  2. Absolute value: 0.21.
  3. Divide by the true value: 0.21 ÷ 9.81 ≈ 0.021407.
  4. Multiply by 100: about 2.14%.

The calculator also shows the signed error (−0.21, or −2.14%). The sign tells you the direction: negative means the measurement was too low, positive means too high. Many lab reports ask for the absolute version only, but the sign is useful when you are looking for a systematic bias, such as a scale that always reads heavy.

  • Absolute error: |observed − true|, in the original units.
  • Relative error: the same ratio as percent error but left as a decimal (0.0214 rather than 2.14%).
  • Percent difference: used when neither value is the “correct” one, such as two students’ measurements. It divides by the average of the two values instead. The percentage calculator has a mode for it.

Tips and caveats

  • Percent error is undefined when the true value is zero. Report the absolute error in that case.
  • A small percent error shows accuracy (closeness to the truth), not precision (repeatability). Repeated measurements can agree closely with each other and still be consistently wrong.
  • Keep the same units for both values. Mixing grams and kilograms produces a meaningless percentage.
  • What counts as a good result depends on the field. In an introductory physics lab, under 5% is often acceptable; in analytical chemistry, well under 1% may be expected.

Frequently asked questions

Can percent error be negative?

The standard formula uses the absolute value, so it is always zero or positive. A signed version (shown as well) is negative when the measurement is below the true value.

What is a good percent error?

It depends on the task. Many school science labs treat less than 5% as good, while precise industrial or analytical work may need well under 1%.

What is the difference between percent error and percent difference?

Percent error compares a measurement with a known true value. Percent difference compares two measurements when neither is known to be correct, dividing by their average.

Why can't the true value be zero?

The formula divides by the true value, and division by zero is undefined. Use the absolute error instead.