Skip to content

Circle Calculator

Know one measurement of a circle?

MathUpdated Free · No sign-up

How to use the Circle Calculator

  1. Choose I know the.
  2. Enter Value.
  3. Choose Unit of length (Enter every length in this unit).
  4. Read your answer in the results panel. It updates as you type, and the breakdown, step-by-step working and any charts or tables appear below it.
  5. Use Share link to save or send the exact calculation, or Copy to paste the results elsewhere.

The four circle measurements

Every circle is fixed by a single length, so knowing any one of these lets you find the rest:

  • Radius (r): from the center to the edge.
  • Diameter (d): straight across through the center, d = 2r.
  • Circumference (C): the distance around, C = 2πr = πd.
  • Area (A): the space inside, A = πr².

Formulas in every direction

You know Radius
Diameter d r = d ÷ 2
Circumference C r = C ÷ (2π)
Area A r = √(A ÷ π)

Once you have the radius, the other values follow from the formulas above. π (pi) is the ratio of any circle’s circumference to its diameter, about 3.14159265. It is irrational, so its digits never end or repeat; the calculator uses it to full double precision.

Worked examples

A circle with radius 5 cm has diameter 10 cm, circumference 2 × π × 5 ≈ 31.42 cm and area π × 25 ≈ 78.54 cm².

A round table needs a tablecloth covering 100 square feet of floor. The radius is √(100 ÷ π) ≈ 5.64 ft, so the cloth must be about 11.28 ft across.

A tree trunk measures 1.5 m around. Its diameter is 1.5 ÷ π ≈ 0.477 m. Foresters use exactly this trick with a tape measure to estimate trunk diameter without cutting the tree.

Things to watch

  • Area grows with the square of the radius. A 16-inch pizza has (16 ÷ 12)² ≈ 1.78 times the area of a 12-inch one, even though it is only a third wider.
  • Circumference is a length (cm, ft) but area is in square units (cm², ft²). Do not mix them when converting.
  • Many products quote diameter, such as pipes, wheels, pizzas and screens. Halve it before using a radius formula.

Arcs, sectors and chords

Parts of a circle use the same radius with an angle θ measured from the centre:

  • Arc length (part of the circumference) = 2πr × θ ÷ 360 when θ is in degrees.
  • Sector area (a pizza-slice shape) = πr² × θ ÷ 360.
  • Chord length (a straight line between two points on the edge) = 2r × sin(θ ÷ 2).

For a 10-inch-radius pie cut into 8 equal slices, each slice has θ = 45°, an arc of 2π × 10 × 45 ÷ 360 ≈ 7.85 in and an area of π × 100 ÷ 8 ≈ 39.27 in².

Common circle sizes

Diameter Circumference Area
1 in 3.14 in 0.785 in²
12 in (pizza) 37.70 in 113.10 in²
16 in (pizza) 50.27 in 201.06 in²
1 m 3.14 m 0.785 m²
10 ft (pool) 31.42 ft 78.54 ft²

Frequently asked questions

How do I find the radius from the circumference?

Divide the circumference by 2π. A circumference of 50 cm gives a radius of 50 ÷ 6.2832 ≈ 7.96 cm.

How do I find the diameter from the area?

Divide the area by π, take the square root to get the radius, then double it. An area of 50 m² gives r ≈ 3.99 m and d ≈ 7.98 m.

Is circumference the same as perimeter?

Yes. Circumference is simply the name for the perimeter of a circle.

What value of pi does the calculator use?

The full double-precision value, 3.141592653589793, so results are accurate far beyond what you will ever measure.