Skip to content

Surface Area Calculator

Enter the dimensions of a solid to get its total surface area with the formula worked through, plus lateral and base areas and conversions to other square units.

MathUpdated Free · No sign-up

How to use the Surface Area Calculator

  1. Pick what you want to work out using the tabs: Sphere, Cone, Cube, Cylinder, Rectangular tank, Capsule, Spherical cap, Conical frustum, Ellipsoid, Square pyramid or Tube.
  2. Enter Radius (r).
  3. Choose Unit of length (Enter every length in this unit).
  4. Read your answer in the results panel. It updates as you type, and the breakdown, step-by-step working and any charts or tables appear below it.
  5. Use Share link to save or send the exact calculation, or Copy to paste the results elsewhere.

What surface area measures

Surface area is the total area of all the faces and curved surfaces of a solid: how much paper you would need to wrap it, paint to coat it or sheet metal to build it. It is measured in square units, while volume is in cubic units. Many solids also have a lateral area, which is the side surface without the top and bottom, such as the label on a can.

Formulas

Solid Total surface area
Sphere 4πr²
Cone πr(r + l), where l = √(r² + h²) is the slant height
Cube 6a²
Cylinder 2πr(r + h)
Rectangular box 2(lw + lh + wh)
Capsule 2πr(2r + h)
Spherical cap 2πRh + π(2Rh − h²), curved part plus flat base
Conical frustum π(r + R)s + π(r² + R²), where s is the slant height
Square pyramid a² + 2a√((a/2)² + h²)
Tube π(D + d)l + 2 × π(D² − d²)/4
Ellipsoid approximated (see below)

Worked example: a cone

A cone with base radius 3 cm and height 4 cm has slant height √(3² + 4²) = 5 cm. The curved side has area π × 3 × 5 ≈ 47.12 cm² and the circular base π × 3² ≈ 28.27 cm², so the total is π × 3 × (3 + 5) = 24π ≈ 75.40 cm². Note that the slant height, not the vertical height, is what goes into the side area.

The ellipsoid exception

A sphere has a neat formula, but a general ellipsoid with three different semi-axes does not: its exact surface area needs elliptic integrals. The calculator uses Knud Thomsen’s approximation, 4π((apbp + apcp + bpcp) ÷ 3)1/p with p = 1.6075, which is within about 1% for any shape and exact for a sphere.

Tips

  • Doubling every dimension multiplies surface area by 4 but volume by 8. That is why small animals lose heat faster and why crushed ice melts quicker than a block.
  • For an open-topped box or tank, subtract the area of the missing lid (l × w) from the total.
  • For painting a room, you usually want the lateral area of the walls only, minus doors and windows.

Frequently asked questions

What is the difference between lateral and total surface area?

Lateral area covers only the sides. Total surface area adds the base and, if there is one, the top. For a cylinder the lateral area is 2πrh and the total is 2πrh + 2πr².

How do I find the surface area of a cylinder?

Add the two circular ends (2πr²) to the side, which unrolls into a rectangle 2πr wide and h tall. For r = 3 and h = 10 that gives 2π × 3 × 13 ≈ 245.04 square units.

Why is slant height used for cones and pyramids?

The sloping faces are tilted, so their true height runs along the slope, not straight up. The calculator works out the slant height from the radius or base and the vertical height.